Hi.You guys rebarreled my Mosin, I wanted to share the results but unfortunately you don’t have a "Feedback section" for your costumers on a website. Needless to say I am VERY VERY happy!!! Please take a look at the attached pictures. Cheers!!! Dimitri!
Dan, I want to tell you how pleased I am with the prefit Savage 6.5-06 AI barrel I received from you. The barrel was/is very easy to break in with very little copper fouling first two shots. I cleaned after every round for 1st five rounds, then cleaned after every five rounds for next five times (I'll [...]
Hey guys--love your barrels. Best deal on the planet these days. Have 2 specialty pistol rigs both shooting .75-.5 MOA consistently. Here's a pic of my 22-250 Savage Super Striker/16" 8-T McGowen/3.5-15x NF/65 JLK Low Drag @ 3240 mv. This is how I test my coyote rigs, by shooting 1 shot each at the [...]
McGowen Barrels, I recently purchased 3 barrels from McGowen, 2 of the barrels were .257 Weatherby and 1 is a .264 Winchester Mag. I recently finished the build on the first .257 Weatherby, scoped the rifle, and shot it. To say I was impressed would be an understatement. After cleaning the barrel (very smooth [...]
My 27-300 WBY custom rifle was recently completed by Pete Underwood of Jims Firearms in Baton Rouge LA. Using a Lawton 7000 Action, Jard Trigger and Choate Stock along with your 32" barrel the results have far exceeded all other rifles I have ever fired. Enclosed is a target, the first group of the rifle [...]
Dan, I have to tell you how happy I am with the barrel that you built for me. It replaced the old shot-out original barrel that was on our family 1895 Mauser. As you can see by the attached photo, I added a Leupold VX-3 and built a custom laminate stock. I also had a [...]
I had the barrel installed on my revolver without a hitch and the first two rounds freehand at 40 feet are as seen below. Great job and thanks again!
Dan, finally finished the 38-55, sent some photo's, thanks for the help. Are you interested in rebarreling a 25-35 on another 336 action for me, now that I know what it takes to put one together I could send all the extra parts to begin with, let me know, I am so happy with the job you [...]
Hello Dan, We received the .204 Ruger late morning Oct. 7 and it was in action 1 1/2 hours after being unloaded from Fed Ex. I an working up a load using the 40 gr. VMax bullet & IMR 8208 powder. Attached is a photo of our .22-250 & 6.5-06 with 3 groups. [...]