Dave Shelton’s 243 Winchester
Here is what the rig looks like, and here is what a fly looks like when you tap it at 100 yards. J It’s insanely accurate. Playpower Inc.
Brian Guthrie’s 6.5 x 284
Hey Dan, It's been quite some time since I got my barrel back, I doubt you even remember helping me out. I've been toying with what little factory ammo I could find to break it in and it's taken me this long to gather up everything I needed to load my own for the 6.5-284 [...]
Dimitri’s Mosin Nagant
Hi.You guys rebarreled my Mosin, I wanted to share the results but unfortunately you don’t have a "Feedback section" for your costumers on a website. Needless to say I am VERY VERY happy!!! Please take a look at the attached pictures. Cheers!!! Dimitri!
Gregory Key’s 6.5 x 300 WSM
Dan, I just wanted to thank you for another excellent barrel! I installed it this past Sat and only got a chance to get 8 rounds through it before my Brother-N-Law invited me to an impromptu visit on his deer lease. The rest is history as the 6.5, 140gr Berger found it’s mark! Everything worked [...]
Howard Johnsons 300 Blackout
Thought I'd show you the results from the barrel you made for me. Powder coated plain base 145 gr. LFN @ 50 yds, ~1800 fps (clocked in the 1:7). Neck & bore are tighter than my 1:7 so I need to work on the load a bit. I wasn't shooting for groups, just had to [...]
Joseph Stumpf’s AR10
AR10 project finally all done, over a year invested. Mounted on AR10 is a 6.5 Creedmoor with a McGowen Precision 22" barrel. Along side is the matching 308 upper. The other 2 pics are of my 6.5x47 Lapua, we just refinished the paint on it. Splashed 10 rounds with AR-10 6.5 Creedmoor at 500 meters [...]
Up In Arms 408 Cheytac
Dan, As you can see, this sale took place over a year ago. On the exact day that I received this barrel, the customer that I was building the 408 CheyTac backed out of the project. The barrel and action sat on my parts shelf until this past December. I finally built the rifle for [...]
Todd Orr’s 257 Weatherby
Thank for making gr8 product, this is my .257 Wthby .418" grp
RifleShooter.com Review : Remage
Finally, the weather broke and I got a chance to shoot my Remington 700 Remage conversion. If you didn’t read the installation post, take a look at Rebarrel a Remington 700 without a lathe: McGowen’s Remage barrel conversion. A Remington 700 that has a Remage (REMington savAGE) conversion, uses a barrel system similar to a Savage; a [...]