The cost of an AR15 barrel is dependent upon the make-up of the barrel, including length, material, and extras like fluting. You can order a custom AR15 either via telephone, email, or with our online form here.

A “standard” AR15 is up to 18″ long. It can be either Stainless Steel or Chrome Moly. The muzzle is threaded with the proper threads dependent upon the cartridge. In 223 or 5.56 the standard muzzle thread is 1/2″ x 28 TPI. For the 300 AAC Blackout the thread is 5/8″ x 24 TPI. Also note that the contour of your AR15/10 barrel is dependent upon your gas block diameter that you are going to use. Most common is .750″, but there is also .625″, .875″ and .936″. Unless you are using a “clamp-on” gas block the muzzle diameter will be dependent upon the gas block size. For example: If you are using a slip on .750″ gas block, the largest diameter that the muzzle can be is approximately .750″.

 

*If you request a thread that we do not currently offer, there will be an additional charge of $10.00 added to the cost of the barrel. This will show as “Non-Standard Thread” on your invoice.
**Please note on 300 AAC Blackout barrels, if you are shooting sub-sonic the only system length that should be done is a pistol length. If you are only shooting super-sonic we have found that the gas system length is dependent upon the barrel length. We have done in a Carbine system length and found that the gas port needs to be adjusted for your particular rifle. Rifle length system on a 20″ or longer barrel WILL NOT WORK

What is the Correct Gas System Length for my Barrel?

AR-15 Barrel Base Pricing

Standard AR-15 Barrel

$30000+S&H
  • Up To 18″ Long
  • Stainless or Blued

Fluting

$6500Add'l
  • Fluting an AR Barrel removes OUNCES.

Non Standard Threads

$1000Add'l
  • If you request threads that we do not currently offer, there will be an additional charge.  

 

Common AR Contours

Steps To Order

  • Desired Contour

  • Gas Port Location

    (Pistol, Carbine, Mid Length or Rifle)

  • Material

  • Barrel Length

  • Finish

    (Machine Finish, Polished or Matte*)

  • Cartridge

  • Rifle Twist

  • * Matte Finish Adds $15.00

AR-10 Barrel Base Pricing

The cost of an AR10 barrel is dependent upon the make-up of the barrel, including length and whether it is fluted. You can order a custom AR10 barrel via telephone, email or the PayPal form below.

Standard AR-10 Barrel

$35000+S&H
  • Up To 18″ Long
  • Stainless or Blued

Fluting

$6500Add'l
  • Fluting an AR Barrel removes OUNCES.

Non Standard Threads

$1000Add'l
  • If you request threads that we do not currently offer, there will be an additional charge.  

Shop Our Available AR-10 & AR-15 Prefits